Steel Cutter 38

Steel Cutter 38 Details

Ref 53154
Price £34,950.00
Reduced
LOA 11.6m (38'0")
Year 1967
Construction Steel
Underwater profile long keel
Berths 5
Engine 1 x diesel 37hp, Beta (unknown year)
Lying East London

Contact the Broker

Boatshed Broker Nick Price
Telephone +44 (0)870 990 5857
Mobile +44 (0)7595 341 563
Email nick@boatshedthames.com

I want to see full spec & up to 80 photos of this boat,register me now

Extra Details

Designer
Builder
Lying East London
Fuel capacity 2 x 682 ltr (150.0 G)
Water capacity 2 x 477 ltr (105.0 G)
Holding tank capacity 1 x 109 ltr (24.0 G)
Last survey Not Recorded

Mechanical

Engine 1 x diesel 37hp
Beta (unknown year)
Engine Hours Not Recorded
Water cooled Fresh
Steering Wheel steering
Drive Shaft drive, 3 blade prop(s)
Fuel consumption (approx) Not Recorded
Cruising speed (approx) 7 knots
Max speed (approx) 11 knots
Generator output 0KVA
The engine was professionally reconditioned in 2007. There are two generators on board both 700W, one is 240 volt the other 110

Dimensions

LOA 11.6m (38'0")
LWL 0.0m (0'0")
Beam 3.4m (11'0")
Draft Min 1.4m (4'6")
Draft Max 1.4m (4'6")
Displacement 0kg (0.0lbs)
Headroom 1.9m (6'2")
Storage On marina

Rig

Cutter rigged Aluminium spars (unknown year), with stainless steel standing rigging (unknown year)

Sails

Reefing mainsail Slab
(unknown year)
Headsail Hank on (2007)
Halyard winches 1
Sheet winches 2
Other sails Genoa (unknown year)
Storm Jib (unknown year)
There are three spare winches on board.

Electrical Systems

12 volt,

construction

Steel construction with long keel underwater profile, paint finish

Accommodation

Cooker tick Grill tick
Oven tick Sink tick
Fridge tick Freezer tick
Curtains tick Pressurised water system tick
Hot water system tick    
Handbasin 1
Shower 1
Heads 1 heads (Manual)
5 berths with 2 doubles and 1 singles in 3 cabin(s) 2 burner gas cooker

Nav Equipment

Compass tick Echo sounder tick
VHF tick SSB tick
GPS tick Stereo tick
Clock tick Barometer tick
Navigation lights tick Computer tick
Email communication is also available using the SSB radio and the computer inconjunction with C-Talk

Deck Gear

Sprayhood tick Warps tick
Fenders tick Boathook tick
Instrument Covers tick    
5 anchors
(Bruce, CQR, Danforth, Fisherman)
250.0m (820'3") of chain
100.0m (328'1") meters of warp

Safety Equipment

Life jackets tick    
2 bilge pumps (1 manual / 1 electric)

Broker's Comments

Register with Boatshed to see 43 extra photos of this Steel Cutter 38.
So much boat for the money, a long distance cruiser that could take you anywhere. You step on board and just dream of far off anchorages and adventure. And of course you would have to anchor, with so many of them on board. Such items typify the level of kit that she has on board. Belt and braces sailing. She has a soft chine hull which gives a much better motion than most hard chine sailing boats. There is just the right amount of gear to get you from A to B safely, but not so much that maintenance is all you will ever do.
Don't dream anymore, just buy her and go.
These boat details are subject to contract.
Note: Offers on the asking price may be considered.

This Steel Cutter 38 has been personally photographed and viewed by Nick Price of Boatshed Thames. Click here for contact details.
Disclaimer
The particulars detailed herein are intended to give a fair description of the vessel but their accuracy cannot be guaranteed, these particulars are not a part of any contract or offer and are supplied on the understanding that all negotiations shall be through Boatshed Brokerages, who are acting as brokers for the vendor. The vendor is not selling in the course of a business unless otherwise stated. The prospective purchaser is strongly recommended to check the particulars and where appropriate, at his own expense, to employ qualified agents to carry out surveys, structural and/or mechanical & electrical.
Feedback Form